Chromatography Autosampler Vial Septa
Microsolv Technology Corporation Septa, 13mm, PTFE Disc for use in 13-425mm thread, 15x45mm autosampler vial caps. Caps sold separately. 1000/CS.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal. This Septa is used in Caps for 4ml vials.
Grainger Wire Rope Stud #10-32 RH Thread 3/32 in
The Grainger 16X690 is a 3M Novec 1230 Clean Agent Fire Extinguisher that provides fast fire suppression for Class A, B, and C fires. This UL rated, rechargeable extinguisher contains 12 lbs of Novec 1230 fluid, has a discharge range of 10-15 ft, and provides approximately 35 seconds of discharge time. The extinguisher features a steel cylinder with epoxy ester lining and uses a squeeze grip valve. It is ideal for protecting sensitive electrical equipment in data centers, telecom facilities, industrial sites and vehicles. The extinguisher measures 20.5" tall x 7.75" diameter and weighs approximately 37 lbs when full.
Analytical Sales & Services Pre-Slit 13mm Septa Starburst, Case/1000.
Pre-Slit 13Mm Septa Starburst, Case/1000.
Microsolv Technology Corporation Septa, 20mm, Headspace, Blue Silicone Rubber completely laminated with Transparent PTFE. For use in 20mm Crimp Caps, sold separately. 1000/CS.
Silicone Rubber with Durometer of 45 Shore A, (hardness) and 3.0mm thick. Completely laminated with Ultra Clean PTFE on both sides of the Septa which is good for sensitive analyses. The lower Durometer means that this is a softer Septa and therefore better for easier penetrations by autosampler needles. Wide temperature range from -60⁰ to 200⁰C. Use in Aluminum or Steel Crimp Caps for Headspace autosamplers. Supplied in Polyethylene Bags.
Microsolv Technology Corporation Septa, 20mm, Headspace, Molded Butyl Rubber, Grey, completely laminated with transparent PTFE. For use in 20mm Crimp Caps, sold separately. 1000/CS.
Shaped, Butyl Rubber with Durometer of 50 Shore A, (hardness) and 3.0mm thick. Completely laminated with PTFE on both sides of the Septa. Temperature resistant from -40⁰ to 120⁰C. Use in Aluminum or Steel Crimp Caps for Headspace autosamplers. Supplied in Polyethylene Bags. Can also be used as a stopper.
Microsolv Technology Corporation Septa, 20mm, Headspace, White Silicone Rubber / Silver Foil. For use in 20mm Crimp Caps, sold separately. High Temperature. (10x100) 1000/CS.
Silicone Rubber / Aluminum Foil Silver Septa with Durometer of 50 Shore A, (hardness) and 3.0mm thick is good for high temperature analyses. No color has been added to this Septa. Often used with Perkin Elmer Instruments.Wide temperature range from -60⁰ to 220⁰C. Use in Aluminum or Steel Crimp Caps for Headspace autosamplers. Supplied in Polyethylene Bags.
Bellco Glass, Inc. White PTFE Septa Disk,13mm
Manufactured from red ptfe silicone. Ideal for screw thread vials. MADE IN THE USA. Autoclavable Size: 13mm Septa thickness: 0.010"
Bellco Glass, Inc. White PTFE Septa Disk, 8mm
Manufactured from red ptfe silicone. Ideal for screw thread vials. MADE IN THE USA. Autoclavable Size: 8mm Septa thickness: 0.010"
ENVIRONMENTAL SAMPLING SUPPLY INC 22MM 0.125IN GREEN SEPTA EACH
NC1632800 22MM 0.125IN GREEN SEPTA EACH
Microsolv Technology Corporation Septa, 20mm, Headspace, Molded, Grey Butyl Rubber / Light Grey Rubber with Laminated PTFE. For use in 20mm Crimp Caps, sold separately. Pharma-Fix type Septa. 1000/CS.
Shaped, Butyl Rubber with Durometer of 50 Shore A, (hardness) and 3.0mm thick. Partially laminated with PTFE only on the light grey side of the Septa that faces the sample. Butyl Rubber facing the glass vial provides a very good seal, due to its elasticity. Combining inertness of PTFE and elasticity of Butyl Rubber. This type of Septa is commonly known as Pharma-Fix™ and is temperature resistant from -40⁰ to 120⁰C. Use in Aluminum or Steel Crimp Caps for Headspace autosamplers. Supplied in Polyethylene Bags.